发布时间:2019-06-27 09:52:48编辑:auto阅读(1846)
Forgotten The System Password --------------------------------------------------------------------------------
If you've not set a System password before, the unit will accept the default password
"admin". Remember that all passwords are case sensitive. If you've changed the System password but cannot remember it, then the following procedure can be used to reset the whole unit back to the fact | |
1. Unplug the power, and remove the all cables from the gateway.
2. Using an RJ45 cable, connect the gateway's Cable/DSL port to one of the LAN ports.
3. Apply power to the unit
4. The Alert LED will start to flash. Wait until the flash rate changes to 2 seconds on, 2 seconds off, continuously.
5. Unplug the power and re-connect your network as before.
6. Apply power.
7. The unit will now | |
the default IP address of 192.168.1.1 and subnet mask of 255.255.255.0. You should now follow the steps in the Installation Guide to re-install your gateway |
上一篇: H3C 网吧特色方案
下一篇: python基本数据类型(一)-pyth
48931
48049
38810
35930
30351
27129
26130
20967
20793
19143
669°
746°
722°
722°
701°
654°
756°
842°
954°
1195°